Actual discharge not showing in Plot (FIT)

[jerrybetieParticipant]

Hi HARC,

I’m considered new to RORB. At the moment, I’m at a stage of calibrating Kc value in FIT. However, after I key in Kc value and try to plot, I only can see the calculated discharge value on the plotted graph. The actual discharge line does not appear in the plotted graph. See attachment.

I have checked the catchment and storm files, but I did not manage to find what is the source for this problem.

Appreciate if you can advise me on how to solve this issue.

Thanks,

Jerry

Attachments:

You must be logged in to view attached files.

[Benson LiuModerator]

Hi Jerry,

For the input hydrograph to show in the plot the catchment file print node needs to be set to a code 7.1. With the print node changed to a 7.1 RORB will then read in a hydrograph from the storm file and plot it with the calculated hydrograph.

Kind regards,

Benson

[jerrybetieParticipant]

Hi Benson,

Thanks for your advice. I solved the issue.

Cheers,

Jerry

[Author]

Posts