+61 3 9908 2160
enquiries@harc.com.au

Home › Forums › RORB – general use › Getting Start with RORB

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • February 23, 2021 at 1:45 AM #2036
    georasaq
    Participant

    GoodDay Everyone! Am working on flood modeling. Am having it to get started with RORB for the hydrological modeling of the rainfall data. Pls, i need a getting start tutorial to guide me

    February 23, 2021 at 9:39 AM #2037
    Benson Liu
    Moderator

    Hi,

    Chapter 10 of the RORB manual has some worked examples on how to run RORB. Table 5.2 of the manual also provides the structure of the rainfall inputs for a single storm.

    Kind regards,

    Benson

    February 23, 2021 at 8:13 PM #2041
    georasaq
    Participant

    Thanks Benson. I need the link to get the user manual?

    February 24, 2021 at 8:56 AM #2042
    Benson Liu
    Moderator

    The manual is packaged as part of the RORB download. On our website, if you go to the software tab (at the top of the webpage) and then download the latest software you will get an installer. After installing RORB, the manual should also be in the same folder as the RORB executable.

    Kind regards,

    Benson

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.