(03) 9908 2160
enquiries@harc.com.au

Home Forums RORB – general use inflow/outflow node

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #1967

    hasansins
    Participant

    Hi there. I am trying to input a user defined hydrograph to my inflow outflow node. But can not find where to enter this data? Any help would be much appreciated.

    Kind Regards,

    #1969

    Benson Liu
    Moderator

    Hi,

    The data for user defined hydrographs are inputted in the storm file, how to construct the storm file and enter the data for inflow hydrographs are detailed in Table 5-2 of the RORB manual. If you have multiple input hydrographs then they will need to be entered into the storm file in calculation order. You can check the calculation order of the input hydrographs by going to the View tab in the RORB GE, click on “View Calculation Order” and ticking the bottom check box “Code 9 – Inflow / Outflow”.

    Kind regards,

    Benson

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.